Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual M1109 Y1 pulse output pause ramp down

2. Programming Concepts

Special		ES2	SS2	SA2	SX2	OFF	STOP	RUN	Attrib.	Latch	Default
	Function					Ø	Ø	Ø
M		EX2				ON	RUN	STOP		-ed
M1109	Y1 pulse output pause (ramp down)	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1110	Y2/CH1 (Y2, Y3) pulse output pause	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	(ramp down)
M1111	Y3 pulse output pause (ramp down)	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1112	Switching clock pulse of Y0 for PWM	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	instruction (ON: 100us; OFF: 1ms)
M1113	Switching clock pulse of Y2 for PWM	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	instruction (ON: 100us; OFF: 1ms)
M1119*	Enable 2-speed output function of	○	╳	○	○	OFF	OFF	OFF	R/W	NO	OFF
	DDRVI instruction
	Retaining the communication setting of
M1120*	COM2 (RS-485), modifying D1120 will be	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	invalid when M1120 is set.
M1121	For COM2(RS-485), data transmission	○	○	○	○	OFF	OFF	-	R	NO	OFF
	ready
M1122	For COM2(RS-485), sending request	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1123	For COM2(RS-485), data receiving	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	completed
M1124	For COM2(RS-485), data receiving ready	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1125	For COM2(RS-485), communication ready	○	○	○	○	OFF	OFF	OFF	R/W	NO	OFF
	status reset
M1126	For COM2(RS-485), set STX/ETX as user	○	○	○	○	OFF	OFF	OFF	R/W	NO	OFF
	defined or system defined
	For COM2(RS-485), data sending /
M1127	receiving / converting completed. (RS	○	○	○	○	OFF	OFF	OFF	R/W	NO	OFF
	instruction is not supported)
M1128	For COM2(RS-485),	○	○	○	○	OFF	OFF	OFF	R/W	NO	OFF
	Transmitting/Receiving status Indication
M1129	For COM2(RS-485), receiving time out	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
M1130	For COM2(RS-485), STX/ETX selection	○	○	○	○	OFF	OFF	-	R/W	NO	OFF
	For COM2(RS-485), ON when
M1131	MODRD/RDST/MODRW data is being	○	○	○	○	OFF	OFF	-	R	NO	OFF
	converted from ASCII to Hex
M1132	ON when there are no communication	○	○	○	○	OFF	-	-	R	NO	OFF
	related instructions in the program
M1136*	For COM3(RS-485/USB), retaining	○	╳	○	○	OFF	-	-	R/W	NO	OFF
	communication setting
M1137	Retain DNET mapping data during non-	╳	╳	○	○	-	-	-	R/W	NO	OFF
	executing period
	For COM1 (RS-232), retaining
M1138*	communication setting. Modifying D1036	○	○	○	○	OFF	-	-	R/W	NO	OFF
	will be invalid when M1138 is set.
M1139*	For COM1(RS-232), ASCII/RTU mode	○	○	○	○	OFF	-	-	R/W	NO	OFF
	selection (OFF: ASCII; ON: RTU)
M1140	For COM2 (RS-485), MODRD / MODWR	○	○	○	○	OFF	OFF	-	R	NO	OFF
	/ MODRW data receiving error

2 - 2 1