Delta DVP-ES2/EX2/SS2/SA2/SX2/SE manual Reverse control E = PV SV

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming

Device	Function	Setup Range	Explanation
No.
		2: Reverse control (E = PV - SV).
		3: Auto-tuning of parameter exclusively for the temperature
		control. The device will automatically become K4 when
		the auto-tuning is completed and KP, KI and KD is set with
		appropriate value (not avaliable in the 32-bit instruction).
		4: Exclusively for the adjusted temperature control (not
		avaliable in the 32-bit instruction).
		5: Automatic mode with MV upper/lower bound control.
		When MV reaches upper/lower bound, the accumulation
		of integral value stops.
		10: TI / TD mode with MV upper/lower bound control. When
		MV reaches upper/lower bound, the accumulation of
		integral value stops.
			E = the error between SV and PV. If S3
S3+5:	Tolerable range for	0~32,767	+5 is set as 5, when E is between -5
			and 5, E will be 0. When S3 +5 = K0,
	error (E)
			the function will not be enabled.
			Ex: if S3+6 is set as 1,000, MV will be
	Upper bound of		1,000 when it exceeds 1,000. S3+6 has
S3+6:		-32,768~32,767	to be bigger or equal to
	output value (MV)		S3+7, otherwise the upper bound and
			lower bound value will switch.
S3+7:	Lower bound of	-32,768~32,767	Ex: if S3+7 is set as -1,000, MV will be
			-1,000 when it is smaller than -1,000..
	output value (MV)
			Ex: if S3+8 is set as 1,000, the integral
			value will be 1,000 when it is bigger
S3+8:	Upper bound of	-32,768~32,767	than 1,000 and the integration will
			stop. S3+8 has to be bigger or equal S3
	integral value
			+9; otherwise the upper bound and
			lower bound value will switch
			Ex: if S3+9 is set as -1,000, the integral
S3+9:	Lower bound of	-32,768~32,767	value will be -1,000 when it is smaller
			than -1,000 and the integration will
	integral value
			stop.

3 - 242