POWERSUPPLYSHUTDOWN!

Error Number One or more supplies on the A8 post-regulator assembly have been shut down

22 due to an over-current, over-voltage, or under-voltage condition.

POWERUNLEVELED

Error Number There is either a hardware failure in the source or you have attempted to set

179the power level too high. The analyzer allows the output power to be set higher or lower than the specified available power range. However, these output powers may be unleveled or unavailable. Check to see if the power level you set is within specifications If it is, refer to the HP 8753E Network Anulym Semvice ouide for troubleshooting.

PRESS [MENUI, SELECTCW (IF) FREQ,THENSWEPTLO

Error Number When you are sweeping the RF and LO, the IF must be fixed. 161

PRINTABORTED

Error Number When you press the m key, the analyzer aborts output to the printer. 25

printcolornot supporteduithEPSON

Error Number You have defined the printer type as EPSON-P2. Color print is not supported

178 with this printer. The print will abort.

PRINTER:busy

Error Number The parallel port printer is not accepting data. 176

PRINTER: error

Error Number The parallel port printer is malfunctioning. The analyzer cannot complete the

175 copy function.

1O-20 Error Messages

Page 604
Image 604
HP 8753E manual Error Number The parallel port printer is not accepting data