moves the title string data obtained with the

~:~~~~~~~~~~~~~L~,;: co-ad into a data may.

.:::.... ,,,.,.,.,.,.,.,..v., ., ,,.., ,,. . ...% .,.... .........

~~~~~~.~:~~~~.” strips off leading characters that are not numeric, reads the numeric value, and then discards everything else. The number is converted into analyzer internal format, and is placed into the real portion of the memory trace at:

Display point = total points - 1 - loop counter

If the value of the loop counter is zero, then the title number goes in the last point of memory. If the loop counter is greater than or equal to the current number of measurement points, the number is placed in the llrst point of memory. A data to memory command must be executed before using the title to memory command.

outputs a title string to any device with an HP-IB address

that matches the address set with the analyzer m

;...............;

I.............;....;;.. .+.:...:.:.:... ,, c

~~~~~~~~~~~~~...

commands. This

~~;:~~~~~~~

.._...............*i ;.....;..;. ...........Ai.,/.i

.//./;....;.....~. /....;;:......::

::::....................... ;.;..:....;,.~:.,;;~~~..;~.:.:.:.:.:.~~.~.:.:.~.~.~~:.:.~~.:.:.:.:.:.~ __/.//(.~,;,,.~;~..~:

 

softkey is generally used for two purposes:

w Sending a title to a printer when a CR-LF is not desired.

nSending commands to an HP-IB device.

outputs a title string to any device with an HP-IB address

that matches the address set with the analyzer (Z&)

 

...A ......<..a ...;;...~....C.i..;..;..;...;;...........;

:...-: :.....l .. .:.::i.::::::::::::::::::::: ‘:::::.~,;:,, :.:;.‘“:~:;:~:~: :,.,::j) :/:,,

commands. This

~~~~~~,~.~~~~~ ~~~~~~~~~~~~~~~~

;,..L.... ~~~~~._.,~..~ ........... i....__

.......... ..... .........~....,.,.,_ :.,.;,I.,.,,,,,i,.,._.,.,.,.,.,.,.,.,.~,.:.~~:.:.:.:.:.:.:.:.:.:.:.~.:.:.:.:.:~~~~.:.:.~.~.~~:.~~~,.~.~:.~,.:.~~~,.;:.;:::;;:;~,.:.~.:~:.:.~~;~;:

 

softkey is generally used for two purposes:

w Sending a title to a printer when a CR-LF is not desired.

nSending commands to an HP-IB device.

outputs a title string to any device with an HP-IB address that matches the address set with the analyzer m

~~~~~~~~ ~~~~~~~~~~ commands. Tl,& =feey

i..r...:

is generally used for two purposes:

nSending a title to a printer for data logging or documentation purposes

nSending commands to a printer or other HP-IB device.

is used in conjunction with other search features to track the search with each new sweep. Turning tracking on makes the analyzer search every new trace for the specified target value and put the active marker on that point. If bandwidth search is on, tracking searches every new trace for the specified bandwidth, and repositions the dedicated bandwidth markers

When tracking is off, the target is found on the current sweep and remains at the same stimulus value regardless of changes in trace response value with subsequent sweeps.

A maximm and a minimum point can be tracked simultaneously using two channels and uncoupled markers.

goes back to the two-port cal menu when transmission measurements are finished.

Key Definitions 849

Page 538
Image 538
HP 8753E manual ~~~~~~~~~~~~~