HP 8753E manual Using the Display Functions, Example Dua.l Channel With Split Display On

Using the Display Functions

To View Both Primary Measurement Channels

In some cases, you may want to view more than one measured parameter at a time. Simultaneous gain and phase measurements for example, are useful in evaluating stability in negative feedback amplifiers. You can easily make such measurements using the dual channel display.

1. To see channels 1 and 2 in the same grid, press:

” ,.:s’<$$:.<

2* ‘lb view the measurements on separate graticules, press: Set ~~~~~~~~‘~~~~~ to 2X. The analyzer shows channel 1 on the upper half of the display an~~~~~~~~n the lower half

of the display. The analyzer also defaults to measuring Sll on channel 1 and &I on channel

2.

~000027

Figure 2-3. Example Dua.l Channel With Split Display On

2-6 Making Measurements