HP 8753E manual Key Definitions

(Option 010 only) is used to specify the parameters of the window in the transform menu.

(Option 010 only) sets the pulse width to the widest value allowed. This minimizes the sidelobes and provides the greatest dynamic range.

(Option 010 only) is used to set the window of a time domain measurement to the minimum value. Provides essentially no window.

(Option 010 only) is used to set the window of a time domain measurement to the normal value. Usually the most useful because it reduces the sidelobes of the measurement somewhat.

is used to terminate basic units: dB, dBm, Hz, dE?/GHz, degrees, or seconds. It may also be used to terminate unitless entries such as averaging factor.

toggles the PLOTTER/PRINTER serial port data transmit control mode between the Xon-Xoff protocol handshake and the DTR-DSR (data terminal ready-data set ready) hardwire handshake.

converts reflection data to its equivalent admittance values

converts transmission data to its equivalent admittance values.

converts reflection data to its equivalent impedance values.

converts transmission data to its equivalent impedance values.

Key Definitions 6-63