HP 8753E manual Interpolated Error-correction, ~or-co~e&on is on or off Press I- j~~~~~~~~~~

Interpolated Error-correction

You can activate the interpolated error-correction feature with the ~~~~~~:~~~ ~~&3$: softkey.
.i i i .._	i /..//./.

This feature allows you to select a subset of the frequency range or a different number of

points without recalibration. When interpolation is on, the system errors for the newly selected frequencies are calculated from the system errors of the original calibration.

System performance is unspecified when using interpolated error-correction. The quality of the interpolated error-correction is dependent on the amount of phase shift and the amplitude change between measurement points. If phase shift is no greater than 180° per approximately 5 measurement points, interpolated error-correction offers a great improvement over uncorrected measurements The accuracy of interpolated error-correction improves as the phase shift and amplitude change between adjacent points decrease. When you use the analyzer in linear frequency sweep, perform the original calibration with at least 67 points per 1 GHz of frequency span for greatest accuracy with interpolated error-correction.

Interpolated error-correction is available in three sweep modes: linear frequency, power sweep, and CW time.

Note If there is a valid correction array for a linear frequency sweep, this may be interpolated to provide correction at the CW frequency used in power sweep or CW time modes. This correction is part of the interpolated error-correction feature and is not specified.

Note	The preset state of the instrument can be conllgured so that interpolated
	e~or-co~e&on is on or off.					.. ,,,
					press I-) j~~~~~~~~~~
	s.......%.......c.;; ....ii	a....;...........;.;.r.:	..;.. .:...	/	/	_ _	/ _ .,. .,.,.,.,.,.,.,.,.,.,	./ ............. . . .2..:. ...A.......2;................22......,............... >..........~..;;;~.../;;:,.: .>:,.,.: ../:::. ...; ....:,...,....i ::;;:.i;,i.,...i.:::..::,.;.i ..A....~~~~..~ :... ...i..
	~~~~~~~~~ ~~~.~~:~~~~~~~ to con-e the preset &,& of
	,................,.,.,.,...............................;	LJA	,......... .._	../i. .		::.::::.. .//:::::......::. >;x L.;::::.A.._.:
	interpolated error correction.

Application and Operation Concepte 6-76