HP 8753E manual RsE#kswa, Value

RECALL STATE

RsE#kswa, VALUE

is used in conjunction with sequencing, to return the instrument to the known preset state without turning off the sequencing function. This is not the same as pressing the (Preset key: no preset tests are run, and the HP-IB and sequencing activities are not changed.

provides access to the Receiver Cal Menu.

selects the display reference line for color modification.

selects the reference line for printer color modification.

sets the position of the reference line on the graticule of a Cartesian display, with 0 the bottom line of the graticule and 10 the top line. It has no effect on a polar or Smith display. The reference position is indicated with a small triangle just outside the graticule, on the left side for channel 1 and the right side for channel 2.

changes the value of the reference line, moving the measurement trace correspondingly. In polar and Smith chart formats, the reference value is the same as the scale, and is the value of the outer circle.

defines the measurement as SU , the complex reflection coefficient (magnitude and phase) of the test device input.

defines the measurement as Sz2, the complex reflection coefficient (magnitude and phase) of the output of the device under test.

measures the reflection and thru paths of the current calibration standard.

leads to the reflection calibration menu.

completes the adapter removal procedure, removing the effects of the adapter being used.

allows you to change the name of a hle that has already been saved.

resets the color being modified to the default color.

Key Definitions 937