IFBWKEYDISABLED, EDITLISTMODETBL

Information

Message

When list IF bandwidth has been enabled and swept list mode is on, you will

not be able to change the IF bandwidth using the &E?#& key. To change theIF

..-.....

bandwidth, edit the swept list table.

ILLEGALUNITORVOLUMENUMBER

Error Number The disk unit or volume number set in the analyzer is not valid. Refer to the

46 disk drive operating manual.

INITDISKremoves alldatafromdisk

Information Continuing with the initialize operation will destro@ any data currently on the

Message disk.

INITIALIZATIONFAILED

Error Number The disk initialization failed, probably because the disk is damaged.

4 7

INSTRUMENTSTATEMEMORYCLEARED

Error Number All instrument state registers have been cleared from memory along with any

5 6saved calibration data, memory traces, and calibration kit definitions. Additionally, all user-settable selections (such as HP-IB addresses) are set to their defaults.

INSUFFICIENTMEHORY

Error Number Your last front panel or HP-IB request could not be implemented due to

51insufficient memory space. In some cases, this is a fatal error from which you can escape only by presetting the instrument.

INSUFFICIENTMEMORYFORPRINT/PLOT

Error Number There is not enough memory available for the print or plot function. Increase

168the available memory by changing or eliminating a memory-intensive operation such as reducing the number of points in the sweep.

Error Mesqes lo-13

Page 597
Image 597
HP 8753E manual IFBWKEYDISABLED, Editlistmodetbl