DISKIS WRITEPROTECTED

Error Number The store operation cannot write to a write-protected disk. Slide the

48write-protect tab over the write-protect opening in order to write data on the disk.

DISKMEDIUMNOT INITIALIZED

Error Number You must initialize the disk before it can be used. 40

DISKMESSAGELENGTHERROR

Error Number The analyzer and the external disk drive aren’t communicating properly. Check

190the HP-IB connection and then try substituting another disk drive to isolate the problem instrument.

DISK:noton,notconnected,wrongaddrs

Error Number The disk cannot be accessed by the analyzer. Verify power to the disk drive,

38and check the HP-IB connection between the analyzer and the disk drive. Ensure that the disk drive address recognized by the analyzer matches the HP-IB address set on the disk drive itself.

DISKRElD/WRITEERROR

Error Number There may be a problem with your disk. Try a new floppy disk. If a new floppy

189 disk does not eliminate the error, suspect hardware problems.

DISKWEAR-REPLACEDISKSOON

Error Number Cumulative use of the disk is approaching the mazimum. Copy files as

49necessary using an external controller. If no controller is available, load instrument states from the old disk and store them to a newly initialized disk using the save/recall features of the analyzer. Discard the old disk.

DOMAINRESET

Error Number Time domain calculations were reset due to a change in the frequency range,

67sweep type, or number of points Perform a new time domain transform on the new state.

Error Messages 1O-8

Page 593
Image 593
HP 8753E manual Diskis Writeprotected