nHP C1676A, DeskJet 1200C (can also be used to plot)

nHP C354OA, DeskJet 1600C (can also be used to plot)

nAR LaserJets (can also be used to plot)

nHP 2227B QuietJet

nHP 2225A ThinkJet

nHP 3630A Pain&Jet Color Graphics Printer

Epson printers which are compatible with the Epson ESC/P2 printer control language, such as the LQ570, are also supported by the analyzer. Older Epson printers, however, such as the FX-80, will not work with the analyzer.

Mass Storage

The analyzer has the capability of storing instrument states directly to its internal memory, to an internal disk drive, or to an external disk drive. The internal 3.5 inch floppy disk can be initialized in both LIF and DOS formats and is capable of reading and writing data in both formats. Using the internal disk drive is the preferred method, but the capability to use external disk drives still exists. Most external disks using CS80 protocol are compatible.

Note The analyzer does not support the LIF-1 (hierarchy llle system) directory format.

Caution Do not use the older single-sided disks in the analyzer’s internal drive.

HP-IB Cables

An HP-IB cable is required for interfacing the analyzer with a plotter, printer, external disk drive, or computer. The cables available are:

nHP 10833A HP-IB Cable, 1.0 m (3.3 ft.)

nHP 10833B HP-IB Cable, 2.0 m (6.6 ft.)

nHP 10833D HP-IB Cable, 0.5 m (1.6 ft.)

Interface Cables

nHP C2912B Centronics (Parallel) Interface Cable, 3.0 m (9.9 ft.)

nHP C2913A RS-232C Interface Cable, 1.2 m (3.9 ft.)

nHP C2914A Serial Interface Cable, 1.2 m (3.9 ft.)

nHP 24542G Serial Interface Cable, 3 m (9.9 ft.)

nHP 24542D Parallel Interface Cable, 2 m (6 ft.)

nHP 92284A Parallel Interface Cable, 2 m (6 ft.)

Compatible Peripherals 11-6

Page 622
Image 622
HP 8753E manual Mass Storage, HP-IB Cables, Interface Cables