HP 8753E manual ‘lb set the span to 30 MHz, press &gziJm, Setting the Source Power

4.‘lb set the span to 30 MHz, press: &g(ziJm

Note You could also press the @ and &TJ keys and enter the frequency range limits as start frequency and stop frequency values

Setting the Source Power.

5.lb change the power level to -5 dRm, press:

/ _

Note You could also press ~~~~.~~~~~~~~ ~~~~~~:~,~~~~~ and select one of the power ranges to keep the power setting within the deGned range.

Setting the Measurement.

6.‘Ib change the number of measurement data points to 101, press:

7.To select the transmission measurement, press:

8.To view the data trace, press:

Step 3. Perform and apply the appropriate error-correction.

9.Refer to the “OpUmizing Measurement Results” Chapter for procedures on correcting measurement errors.

10.To save the instrument state and error-correction in the analyzer internal memory, press:

24 Making Measurements