HP 8753E manual Dual Channel Mode, Single graticule see -23a

Dual Channel Mode

**	.:v.:..<: :..;.;;... “;:.:...,.:.~ ,/ii ::.			..DISP set to 1X, the two traces are overlaid on a
’ With ~~~~~~~.~ set to ON and :.$P&IT.
		/..:	.::...
single graticule (see Figure 6-23a)
;.	/	) . . .	./
n With .EQH$%%A# set to ON and ~&&ET DISP set to 2X or 4X, the measurement data is
..,.	,..........................:	::::.,	i ..N.

displayed on two half-screen graticules, one above the other, (see Figure 6-2313).

Current parameters for the two displays are annotated separately.

The stimulus functions of the two primary channels can also be controlled independently

.,., ..._.,. ,..,.. ., ,.,. / .,. .; ,.

using ..~~~~~~~~~:~:a~. off in the stimulus menu. In addition, the markers can be controlled

_.:-:

independently for each channel using ?HH@El@z, #&$HE%,~. in the marker mode menu.

.,.

If one or both adary channels (&me1 3 or 4) are enabled, ‘~~~~~~~~~~~~~ J@jE!~ w-ill inter&,

. ..i i ...* ** ,, i/ IC / .., . <...........a ....

with other softkeys in the c-1 menu to produce different displays See “Customizing the Display” later in this chapter, or “Using the Four-parameter Display Mode” in Chapter 2.

(a) Overlaid Traces (b) Split Display

hg61 Oey

Figure 6-23. Dual Channel Displays

Dual Channel Mode with Decoupled Stimulus

Dnal Channel Mode with Decoupled Channel Power

By decoupling the channel power or port power and using the dual channel mode, you can simultaneously view two measurements (or two sets of measurements , if both auxiliary channels are enabled), having different power levels

Application and Operation Concepte 6 4 3