HP manual 10 HP 8753E Description and Options

8.Measured Input(s). This shows the S-parameter, input, or ratio of inputs currently measured, as selected using the LMeas) key. Also indicated in this area is the current display memory status.

9.Format. This is the display format that you selected using the (Format] key.

10.Scale/Div. This is the scale that you selected using the (Gig) key, in units appropriate to the current measurement.

11.Reference Level. This value is the reference line in Cartesian formats or the outer circle in polar formats, whichever you selected using the &XiGf] key. The reference level is also indicated by a small triangle adjacent to the graticule, at the left for channel 1 and at the right for channel 2 in Cartesian formats.

12.Marker Values. These are the values of the active marker, in units appropriate to the current measurement. (Refer to “Using Analyzer Display Markers” in Chapter 2, “Making Measurements. “)

13.Marker Stats, Bandwidth. These are statistical marker values that the analyzer calculates when you access the menus with the @GZZ&) key. (Refer to “Using Analyzer Display Markers” in Chapter 2, “Making Measurements.“)

14.Softkey Labels. These menu labels redellne the function of the softkeys that are located to the right of the analyzer display.

15.Pass Fail. Duriug limit testing, the result will be annunciated as PASS if the limits are not exceeded, and FAIL if any points exceed the limits.

l-10 HP 8753E Description and Options