HP 8753E manual Cotiguring the Analyzer for the Peripheral, If the Peripheral is a Printer

Cotiguring the Analyzer for the Peripheral

All copy configuration settings are stored in non-volatile memory. Therefore, they are not affected if you press @GZj or switch off the analyzer power.

If the Peripheral is a Printer

_ .., _ _ .,., . . . ...,..,...,,.., .,..... _ _ ,. _ .,.. ....

1. Press LLocal) ~~~~~~~~~~~ ;~$JJQ@ ;E@& .J?= Y&@ until the come& printer choice

...,........~...Li ......L;:...~..~...:::........ A............:::: .: . . . . . ./.......A.....::........._...,... FI......s ...:::: .:::: ....../...A............,,. ;;>;

appears:

q~~~~~~~~:~, (except for HP DeskJet 540 and DeskJet 850C)

,,,:,., .,. ,. ..:::.:.:,.:.:

0 :@#$@$&!~ (printers that conform to the ESUP2 printer control language)

0 ~~~:~~:~~ (for use with the HP DeskJet 540 and DeskJet 850C)

Note	. . _ ~.,.:.:.:.~:.:.:.:.:.:.:.:.:.:.:.:..:...:.:...:.:
	Selecting ~~~~.,~ converts 100 dpi raster information to 300 dpi raster format.
	If your DeskJet printer does not support the 100 dpi raster format and your
	. . . . . . ...;...A:.....:. . . .	......... .::...	....,;...,....;...,.,.
	printing results seem to be less than normal size, select ~,~~~~.
	,s	._	-

2.Select one of the following printer interfaces:

a. Enter the HP-IB address of the printer, followed by ml.

.yeF ,,:,:,‘,>I,,~...~,~,,..,~.~.~,~,~		;:;:::“” ,,..._	..:::.:.:	:..: :.:.:.:.	if there is no edend controller connected to
b. press ILocal and ~~~~~~~~~.~
:..:..:.:..::::	.......	... .......~:.z..>;;; ....	A..s.;..;;>;>	..........w..:::.. ..::...r. ii
the HP-IB bus.	....	............:..:..:..:...	::.:.:.:.:.:.:i
. . . . . . . . . . . .y,:<<. . ..<:..<..:

c. Press @ and ~~~~~~~~~~~~~~~ if there is an external controller connected to the HP-IB bus.

. Choose ~~~ if your printer has a parallel (centronics) interface, and then Connie ;___......i...._......=i;....i_..

the print function as follows:

q ness m and then se•e& the parme• pofi interface fun&ion by pressing ~~~

until the correct function appears:

. If you choose ~~~~~~~,~ the partiel port is dedi.ated for nomd copy

:::I: .................... I...........................~..................i ::::..2;;.:..:..:....... ws.;;...........C.;;;.i ...’

device use (printers or plotters).

.yy~jg’ s F y&p wys~,~~$:~~~

nIf you choo~ ~~~~~~~~~~ the parallel p& is &&-ted for general purpose

I/O, and cannot be used for printing or plotting.

Compatible Peripherals 1 l-9