HP 8753E manual Searching for a ‘beget Amplitude, ~~~~~ ad

Searching for a ‘beget Amplitude

1. Press (@i&X$ ~~~~~~~~ to access the marker search menu.

/. ..d;:.:<IR;~ .z “F::<:.

2* Press ~~~~,~~~~~ to move the active marker to the target point on the measurement trace.

3. If you want to change the target amplitude value (default is -3 dB), press ~~~~~ and enter the new value from the front panel keypad.

4. If you want to search for multiple responses at the target amplitude value, press
.;“:.:~,.	.:.: .v,..:.:	/ .y.	,, ..::.:......:>:;-	,.,:; ,.. .:: .’	:...:,v ,:::....:..:..: ; .; ;. :.: : ‘: ”
~~~;;~~ ad				‘~~~~:~~~6~.~.
:..	...+<.:...	.A;..	...T::....:..::	:....ii:..:i:::.:~:	.......~..	:i:.: s	:..:.
			I@	dB/	REF	-45 dB	I -2s 01 dS	WI	18 dB/ REF - 4 5 d*	1 -2s 087 dS

t

Figure 2-26.

Example of Searching for a Beget Amplitude Using a Marker

234 Making Measurements