HP 8753E manual Numeric keypad, until the desired color appears, Red 100, Yellow 100, Green 100

To change the color of a display elements, press thesoftkey for that element (such as
,. * .,. _ ,. .,. ,. ;,.	::. :.: .-:.:. ”
..:g@ +&.:$$&:>*	Th en press fE&@$ and turn the analyzer front panel knob; use the step keys or the

numeric keypad, until the desired color appears.

If you change the text or background intensity to the point where the display is unreadable, you can the recover a readable display by turning off the analyzer and then turning it back on.

Note Maximum viewing angle with the LCD display is achieved when primary colors or a combination of them are selected at full brightness (100%). The following table lists the recommended colors and their corresponding tint numbers.

‘Ruble 6-3. Display Colors with Maximum Viewing Angle

Display Color	Tint	Brightness	color	1I
Red	0	100	100
Yellow	17	100	100
Green	33	,100	100
cyan	50	100	100
Blue	67	100	100
Magenta	83	100	100
White		100	0

Color is comprised of three parameters:

Tint: The continuum of hues on the color wheel, ranging from red, through green and blue, and back to red.

Brightness: A measure of the brightness of the color.

Color: The degree of whiteness of the color. A scale from white to pure color.

The most frequently occurring color deficiency is the inability to distinguish red, yellow,

and green from one another. Confusion between these colors can usually be eliminated by

_ _ _ _ .,.

hme&ng the brightness between the colors n accompfish this, press the ~~~~~~~~~/...w;;>;>...... ..v>;;..;;.A...... ..z..ii............. .......:..:..::

softkey and turn the analyzer front panel knob. If additional adjustment is needed, vary the

degree of whiteness of the color. lb accomplish this, press the .&it& softkey and turn the

./..A...... .......<ii<:<:.m

analyzer front panel knob.

Note Color changes and adjustments remain in effect until changed again in these menus or the analyzer is powered off and then on again. Cycling the power changes ail color adjustments to default values. Preset does not affect color selection.