2 – Basic operational concepts : Shutting down the
Shutting down the DM-3200
IMPORTANT CAUTION!!! Data associated with
projects (automation, library entries, etc.) is not auto- matically stored on the card. If you turn off the DM- 3200 without having shut down the
YOU MAY LOSE ALL YOUR DATA NOT STORED TO A PROJECT SINCE THE LAST SAVE!
As when you work with computers, we strongly recom- mend that you save your project data to card frequently to avoid any possible data loss.
How to shut down the DM-3200 In order to
shut down the
1Press and hold the SHIFT and CTRL keys (left side of the
2While holding down the key, press the ALT key of the number keypad.
Figure 2.19: Shutting down the
3A popup message (Figure 2.19, Shutting down the
4When the all the data associated with the project has been saved, the screen shows an appropriate message. Use the switch on the rear panel to turn off the
•Alternatively, to reboot the
Starting up the DM-3200
When you power down the
See “About projects and libraries” on page 26 for more details about how the
If the CF card is not inserted, or if a different (or unformatted) CF card has been inserted, an appropri- ate message is displayed (asking if you want to for- mat a blank card, for example).
If you do not shut down the
power it up with the project CF card installed, the screen shows a message warning you:
Figure 2.20: Powering up the
shutdown
TASCAM
