Sony BRC-Z330 operating instructions When the menu of the camera is not displayed

FAUTO/MANUAL button and AUTO indicator Press this button to select focus mode, AUTO or

MANUAL.

When AUTO is selected, the AUTO indicator lights and the FOCUS control and the ONE PUSH AF button are disabled.

If you set AF ASSIST to ON in the FOCUS menu, you can focus on another object with the FOCUS control.

When MANUAL is selected, the FOCUS control and the ONE PUSH AF button are enabled (with the FOCUS indicator lit).

GONE PUSH AF button

Press this button to perform the one-push auto focus function.

HRESET button

Hold down this button and press one of the POSITION buttons, and the memory of the camera corresponding to the pressed POSITION button is cleared to the factory-preset conditions.

When multiple cameras are connected, hold down this button and press the POWER button to set the camera addresses automatically.

IPRESET button

Hold down this button and press one of the POSITION buttons, and the current camera settings are stored in the memory of the camera corresponding to the pressed POSITION button.

JPANEL LIGHT button

Press this button to illuminate all the POSITION buttons and CAMERA buttons. Press the button again to turn off the illumination.

KBACK LIGHT button

When FULL AUTO, SHUTTER Pri, IRIS Pri or GAIN Pri is selected with MODE of the EXPOSURE menu, press this button to enable the backlight compensation function of the camera. Press it again to disable the function.

Hold down the SHIFT button and press this button to enable the spotlight compensation function of the camera. This function adjusts the exposure to a darker level if a portion of the shooting object is illuminated.

To disable the spotlight compensation, hold down the SHIFT button and press this button again.

LPAN-TILT RESET button

Press this button to reset the pan/tilt position of the camera to the initial conditions.

MONE PUSH AWB button

When ONE PUSH is selected with the WHITE BALANCE menu of the camera, press this button to perform the one-push white balance adjustment.

NMENU button

Press this button for about one second to display or turn off the menu of the camera, or return to the main menu.

OJoystick

When the menu of the camera is not displayed

The joystick is used for pan/tilt and zoom operations.

When you incline the joystick right and left, the camera pans. When you incline it forward or backward, the camera tilts. The pan/tilt speed changes according to the angle of the inclination. When you release the joystick, the camera movement stops.

When you turn the dial on the upper part of the joystick clockwise, the subject becomes larger (zoom in). When you turn it counterclockwise, the subject becomes smaller (zoom out).

When you press the button on the top of the joystick for one or two seconds regardless of the PAN TILT ZOOM menu setting, the pan/tilt/zoom are reset and the camera returns to the front.

When the menu of the camera is displayed

The joystick is used for menu operations. Inclining the joystick right, left, forward and backward has the same function as pressing the arrow buttons of the supplied Remote Commander. Pressing the button on the top of the joystick has the same function as pressing the HOME button on the Remote Commander.

PSHIFT button and indicators

Hold down this button and press one of the POSITION buttons. The lower indicator lights and you can use the POSITION buttons for positions 9 to 16. If you release the SHIFT button, the upper indicator lights and the POSITION buttons can be used for positions 1 to 8.

QL/R DIRECTION button

Hold down this button and press POSITION button 2 (REV) to reverse the pan direction to the direction in which you incline the joystick. To reset the direction, hold down this button and press POSITION button 1 (STD).

RPOWER button

Press this button to light the CAMERA button(s) corresponding to the status of the connected camera(s).

Overview

Location and Function of Parts

17