Sony BRC-Z330 operating instructions To recall the stored settings, To cancel the preset memory

To recall the stored settings

Press any of the POSITION buttons, 1 to 6, in which you have stored the settings.

To cancel the preset memory

While holding down the RESET button, press the POSITION button from which you want to cancel the settings.

DATA SCREEN		BACK LIGHT
STD	REV
1	2	3	Press a POSITION
4	5	6
			button.
PRESET		RESET
	POSITION

While holding down

Notes

•When the power is turned on, the camera starts with the settings stored in POSITION 1.

•If you want to retain the previous pan and tilt positions, etc. when the power is turned off and turned on again, store those positions in POSITION 1.

•Storing or canceling the settings in POSITION 1 takes about 2 seconds longer than those of other positions.

•When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION.

Operation Using the Supplied Remote Commander

Storing the Camera Settings in Memory – Presetting Feature

35