Tascam DM-3200 3 – Connections, Stereo outs, trackin, Mic/line inputs and inserts, Assignable

3 – Connections

This section describes how the DM-3200 connects to other equipment in your studio.

Since the DM-3200 is extremely “soft” in terms of the internal routing and patching, it is unlikely that you will need to spend a lot of time connecting and disconnecting equipment once you have your setup in place.

A patchbay is also probably less necessary with the DM-3200 than with many other mixers. See “Rout- ing” on page 47 for full details of how the routing and assignment are managed.

Stereo outs	2-track in		Mic/line inputs and inserts
Assignable
sends/returns		MIDI, control and sync connections
					ADAT I/O
		2 x stereo digital I/O		Cascade	TDIF I/O
				connector

Figure 3.1: Overview of rear panel features

The illustration above provides an overview of the way in which the top and rear panel connections are arranged. Not highlighted are the power connector

and switch, and the two option slots, which may be used to expand the capabilities of the DM-3200.

38 TASCAM DM-3200 User’s Manual