8 – Remote operation : Machine control setup
Machine control setup
With the ALT indicator lit, press the REMOTE key. Use the first soft key to bring up this screen:
This allows the setting of various machine control parameters.
Figure 8.4: Machine control setup parameters
Edit Frames
When this is set on, location memories, etc. are edited to frame accuracy. When it is set to off, loca- tion settings are made to second accuracy.
Cueing mode
When this is on (checked), the FF and REW keys act as shuttle keys. Press the key in play mode to enter fast cueing shuttle mode, and release it to
In
Play Mode
This function determines the way in which the PLAY key works in conjunction with the location facilities. There are three settings: Auto, Deferred and Immediate.
unit is locating, the PLAY indicator flashes, and play- back starts when the location point is reached.
NOTE
AUTO The PLAY indicator flashes as the unit is locating to a location point. When the location point is reached, playback starts automatically. However, if the PLAY key is pressed before the location point is reached, the unit stops locating and starts playing.
DEFERRED The unit stops after location is com- pleted. However, if the PLAY key is pressed while the
Because an open MMC connection cannot determine when the locate point has been reached, deferred play is not possible for a machine controlled in this way.
IMMEDIATE The unit stops after location is com- pleted. If the PLAY key is pressed while the unit is locating, the machine goes straight into play mode, without locating.
Play Command Type
Use this option to make the play commands from the
There are two options: True (02h) and Deferred (03h). Consult the documentation of your other equipment for details of compatibility.
TASCAM
