Wireless Cable Modem Gateway CGD24G User Manual
–End Port. Enter the start port for the trigger range.
•Target Range. The target range consists of the range of incoming ports that will be opened when triggered:
–Start Port. Enter the start port for the target range.
–End Port. Enter the start port for the target range.
•Protocol. Select the protocol for the ports,:
–TCP. Select TCP only.
–UDP. Select UDP only.
–Both. Select both TCP and UDP.
•Select the Enable check box to activate the port trigger.
3.Perform one of the following actions:
•Click Apply to save your settings and activate the port triggers that you have enabled in step 2.
•Click Delete to remove a port trigger that you can select by clicking the radio box next to the port trigger that you want to delete.
•Click Reset to return all trigger and target ranges to their default values of zero.
Setting Up a DMZ Host
You can use the DMZ Host screen to set the gateway to respond to a ping and specify a DMZ address. To configure a default DMZ host:
1.In the main menu, under Advanced, select DMZ Host. The DMZ Host screen displays.
Figure
Customizing Your Network |
