IBM Partner Pavilion 1464, 1454 setup guide Printer setup, Installing a 2000-sheet drawer

Printer setup

If you only purchased a base printer with no options, follow the directions under “Positioning the printer” on page 13.

Note: Be sure to set up the items in the order listed in the table.

Use the following table to locate the instructions you need to set up your printer and any paper handling options you may have purchased.

Installing a 2000-sheet drawer

Topic	Go to page...
Installing a 2000-sheet drawer	11
Installing a 500-sheet drawer	12
Installing a duplex unit	13
Positioning the printer	13
Installing an output expander	14
Installing a 5-bin mailbox	15

Your printer supports one optional 2000-sheet drawer.

Warning: If you have an optional duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer between the duplex unit and the 2000-sheet drawer.

Note: You will install the power cord for the 2000-sheet drawer later.

1Unpack the 2000-sheet drawer and remove any packing material.

2Place the drawer in the location you have chosen for your printer.

3If you are installing a 500-sheet drawer on top of the 2000-sheet drawer, attach the stabilizing bars:

a Place the two stabilizing bars on the ground, narrow side up.

b Lower the 2000-sheet drawer onto the bars, making sure you align the holes in the drawer with the holes in the bars.

c Screw the bars into place using four screws (two screws for each bar).

4Adjust the four leveling feet on the bottom of the drawer, if necessary.

5Continue with “Installing a 500-sheet drawer” on page 12 or “Positioning the printer” on page 13.

Leveling feet

Set up the printer and paper handling options

11