Installing a firmware card
Note: Firmware and flash memory cards offered for other printers cannot be used with your printer.
Warning: Firmware and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.
Follow the instructions in this section to install an optional firmware or flash memory card.
Only one of each type of card is supported.
1Remove the system board access cover (see page 20).
2Unpack the card.
Avoid touching the metal pins on the bottom of the card. Save the packaging.
3Holding the card by its sides, align the pins on the card with the holes on the system board.
4Push the card firmly into place.
The entire length of the connector on the card must touch the system board. Be careful not to damage the card connectors.
Pins
What do I do now?
Task | Go to page… | |
|
| |
Installing a hard disk | 23 | |
|
| |
Installing an option card | 24 | |
|
| |
Replacing the system board access cover | 25 | |
|
|
Install memory, firmware, or option cards
22
