Wireless Cable Modem Gateway CGD24G User Manual
Connecting the Gateway
Note: First, install and set up the gateway using an Ethernet or USB connection to your computer. Then configure the wireless settings. See Chapter 2, “Wireless Configuration for instructions for wireless settings.
Follow these steps to install your gateway:
1.Connect the gateway.
a.Turn off your computer.
b.Using the coaxial cable provided by your cable company, connect the gateway cable port
(A) to your cable line splitter or outlet.
A
Figure
Warning: The cable distribution system must be grounded in accordance with ANSI/NFPA 70 and the National Electrical Code (NEC), in particular section 820.93, Grounding of the Outer Conductive Shield of a Coaxial Cable.
c.Connect the gateway to your computer with either an Ethernet or USB cable.
Note: The USB connection option is only available for Windows PCs. Also, Windows 95 does not support USB without special operating system upgrades and patches.
For an Ethernet connection, use the Ethernet cable that shipped with your gateway to connect a LAN port (B) to the Ethernet adapter in your computer.
Connecting the Gateway to the Internet |
