Wireless Cable Modem Gateway CGD24G User Manual
Router Front Panel
The front panel of the CGD24G gateway contains status LEDs.
Figure
You can use the LEDs to verify connections.The following table lists and describes each LED on the front panel of the CGD24G gateway.
Table 1-1. LED Descriptions
LED | Description |
|
|
Power | • On: Power is supplied to the gateway, and the gateway has completed its initialization. |
| • Off: Power is not supplied to the gateway. |
|
|
Cable Link | • On (green): Configuration of the cable interface by your cable service provider is |
| complete. |
| • Blink: Both downstream and upstream links are established, but before configuration of |
| cable interface is complete. |
| • Off: Configuration of the cable interface is still in progress. The downstream and upstream |
| links have not been established yet. |
|
|
Upstream | • On: The gateway has completed its upstream ranging operation. |
Link | • Blink: The gateway has just powered up or it is getting upstream parameters or |
| performing its upstream ranging operation. |
| • Off: The gateway’s |
| downstream scan. |
|
|
Connecting the Gateway to the Internet |