Wireless Cable Modem Gateway CGD24G User Manual
Figure
By default, the Access List table is empty. You must add wireless clients so that they will have access to the wireless network when the list is enabled.
5.Adjust the access list as needed for your network. You can add devices to the access list using either one of the following methods:
•If the computer is in the Connected Wireless Devices table, click the radio button of that computer to capture its MAC address. Then click Add.
•Enter the MAC address of the device to be added in the Add Access Filter fields. The MAC address can usually be found on the bottom of the wireless device. Then click Add.
Note: If no Device Name appears when you enter the MAC address, you can type a descriptive name for the computer that you are adding.
6.Click Apply to save these settings. Now, only devices in the Access List table will be allowed to wirelessly connect to the gateway.
Wireless Configuration |
