Wireless Cable Modem Gateway CGD24G User Manual
Table 2-1. Wireless Settings (continued)
Settings |
| Description |
|
|
|
Security Options | • WEP (Wired Equivalent | WEP security uses encryption keys. |
(continued) | Privacy) | Wired Equivalent Privacy (WEP) data encryption |
|
| provides data security. WEP Shared Key authentication |
| • WEP (Wired Equivalent | and WEP data encryption will block all but the most |
| Privacy) | determined eavesdropper. |
|
| You can select |
|
| “Configuring WEP (Wired Equivalent Privacy) Wireless |
|
| Security” on page |
|
| |
|
| data security. The very strong authentication along with |
|
| dynamic per frame rekeying of WPA make it virtually |
|
| impossible to compromise. Because this is a new |
|
| standard, wireless device driver and software availability |
|
| may be limited. |
| • WPA | WPA uses the TKIP encryption type and a |
| ||
| • | |
| authentication from a RADIUS server. | |
| Protected Access Pre- | WPA2 uses the AES encryption type and a |
| Shared Key) | |
| • WPA2 | |
| • | authentication from a RADIUS server. |
| For more information about WPA, see “Configuring WPA | |
| Protected Access 2 Pre- | or WPA2 Wireless Security” on page |
| Shared Key) |
|
Configuring WEP (Wired Equivalent Privacy) Wireless Security
Note: If you use a wireless computer to configure wireless security settings, you will be disconnected when you click Apply. Reconfigure your wireless computer to match the new settings, or access the gateway from a wired computer to make further changes.
To configure WEP data encryption:
1.Log in to the gateway using its default address of http://192.168.0.1 or at whatever IP address the unit is currently configured. Use the default user name of admin and default password of password, or the password you have set up.
2.In the main menu, under Setup, select Wireless Settings.
Wireless Configuration |