Polycom SIP 3.0.2 manual Configuration Files

A

Configuration Files

Caution

Note

This appendix provides detailed descriptions of certain configuration files used by the Session Initiation Protocol (SIP) application. It is a reference for all parameters that are configurable when using the centralized provisioning installation model.

This appendix contains information on:

•Master Configuration Files (MAC-address.cfg or 000000000000.cfg)

•Application Configuration (sip.cfg)

•Per-Phone Configuration (phone1.cfg)

•Flash Parameter Configuration

The application configuration files dictate the behavior of the phone once it is running the executable specified in the master configuration file.

Configuration files should only be modified by a knowledgeable system administrator. Applying incorrect parameters may render the phone unusable. The configuration files which accompany a specific release of the SIP software must be used together with that software. Failure to do this may render the phone unusable.

In the tables in the following sections, “Null” should be interpreted as the empty string, that is, attributeName=“” when the file is viewed in an XML editor.

To enter special characters in a configuration file, enter the appropriate sequence using an XML editor:

•& as &

•” as "

•’ as '

•< as <

•> as >

Note	The various .hd. parameters in sip.cfg (such as voice.aec.hd.enable,
	voice.ns.hd.enable, and voice.agc.hd.enable) are headset parameters. They
	are not connected to high definition or HD voice.

A - 1