Polycom SIP 3.0.2 manual Passwords

Administrator’s Guide SoundPoint IP / SoundStation IP

The phone’s local user interface also permits many application settings to be modified, such as SIP server address, ring type, or regional settings such as time/date format and language.

Local Web	Point your web browser to http://<phoneIPAddress>/.
Server Access	Configuration pages are accessible from the menu along the top banner.
	The web server will issue an authentication challenge to all pages except for
	the home page.
	Credentials are (case sensitive):
	User Name: Polycom
	Password: The administrator password is used for this.
Local Settings	Some items in the Settings menu are locked to prevent accidental changes.
Menu Access	To unlock these menus, enter the user or administrator passwords.
	The administrator password can be used anywhere that the user password is
	used.
	Factory default passwords are:
	User password: 123
	Administrator password: 456
Passwords:
Administrator	Network Configuration
password	SIP Configuration
required.	SSL Security settings
	Reset to Default - local configuration, device settings, and file system format
User password	Restart Phone
required.

Changes made through the web server or local user interface are stored internally as overrides. These overrides take precedence over settings contained in the configuration obtained from the boot server.

If the boot server permits uploads, these override setting will be saved in a file called <Ethernet address>-phone.cfgon the boot server as well in flash memory.

Warning Local configuration changes will continue to override the boot server-derived configuration until deleted through the Reset Local Config menu selection.

4 - 56