Polycom SIP 3.0.2 manual Per-Phone Configuration, Registration reg, Parameters include

Configuration Files

Per-Phone Configuration

This section covers the parameters in the per-phone example configuration file phone1.cfg. This file would normally be used as a template for the per-phone configuration files. For more information, refer to Deploying Phones From the Boot Server on page 3-15.

Polycom recommends that you create another file with your organization’s modifications. If you must change any Polycom templates, back them up first.

For more information, refer to the “Configuration File Management on SoundPoint IP Phones” whitepaper at www.polycom.com/support/voice/.

The parameters include:

•Registration <reg/>

•Calls <call/>

•Diversion <divert/>

•Dial Plan <dialplan/>

•Messaging <msg/>

•Network Address Translation <nat/>

•Attendant <attendant/>

•Roaming Buddies <roaming_buddies/>

•Roaming Privacy <roaming_privacy/>

•User Preferences <user_preferences/>

Registration <reg/>

SoundPoint IP 301, 320, 330, and 430 support a maximum of two unique registrations, SoundPoint IP 501 supports three, the SoundPoint IP 550 and 560 supports four, and SoundPoint IP 600, 601, and 650 support six. Up to three SoundPoint IP Expansion Modules can be added to a single host SoundPoint IP 601 and 650 phone increasing the total number of buttons to 12 registrations on the IP 601 and 34 registrations on the IP 650. Each registration can optionally be associated with a private array of servers for completely segregated signaling. The SoundStation IP 4000 supports a single registration.

A - 89