Polycom SIP 3.0.2 manual Transmit Equalization txEq

Administrator’s Guide Addendum for the SoundStation IP 7000

Transmit Equalization <txEq/>

These settings control the performance of the hands-free transmit equalization feature.

Polycom recommends that you do not change these values.

.

Attribute

voice.txEq.hf.IP_7000.preFilter.enable

voice.txEq.hf.IP_7000.postFilter.enable

Default

0

0

Call Handling Configuration <call/>

These new configuration attributes are defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
call.singleKeyPressConference	0,1	0	If set to 1, the conference will be setup after a
			user presses the Conference soft key or
			Conference key the first time. Also, all sound
			effects (dial tone, DTMF tone while dialing and
			ringing back) are heard by all existing
			participants in the conference.
			If set to 0 or Null, sound effects are only heard by
			conference initiator (old behavior).
			Only supported for SoundPoint IP 550, 560, and
			650 and SoundStation IP 7000. For all others,
			set to 0.
call.localConferenceCallHold	0, 1	0	If set to 0, a hold will happen for all legs when
			conference is put on hold. (old behavior).
			If set to 1, only the host is out of the conference,
			all other parties in conference continue to talk.
			(new behavior).
			If set to Null, the default value is 0.
			Only supported for SoundPoint IP 550, 560, and
			650 and SoundStation IP 7000. For all others,
			set to 0.

1 - 11