Polycom SIP 3.0.2 Password these characters if they are correctly escaped, This will be ignored

Administrator’s Guide SoundPoint IP / SoundStation IP

Name	Possible Values	Description
Server Address	dotted-decimal IP address	The boot server to use if the DHCP client is disabled, the
	OR	DHCP server does not send a boot server option, or the
	domain name string	Boot Server parameter is set to Static. The phone can
	OR	contact multiple IP addresses per DNS name. These
	URL	redundant boot servers must all use the same protocol. If
	All addresses can be followed	a URL is used it can include a user name and password.
	by an optional directory and	Refer to Supported Provisioning Protocols on page 3-4. A
	optional file name.	directory and the master configuration file can be
		specified.
		Note: ":", "@", or "/" can be used in the user name or
		password these characters if they are correctly escaped
		using the method specified in RFC 1738.
Server User	any string	The user name used when the phone logs into the server
		(if required) for the selected Server Type.
		Note: If the Server Address is a URL with a user name,
		this will be ignored.
Server Password	any string	The password used when the phone logs in to the server
		if required for the selected Server Type.
		Note: If the Server Address is a URL with user name and
		password, this will be ignored.
File Transmit Tries	1 to 10	The number of attempts to transfer a file. (An attempt is
	Default 3	defined as trying to download the file from all IP
		addresses that map to a particular domain name.)
Retry Wait	0 to 300	The minimum amount of time that must elapse before
	Default 1	retrying a file transfer, in seconds. The time is measured
		from the start of a transfer attempt which is defined as the
		set of upload/download transactions made with the IP
		addresses that map to a given boot server's DNS host
		name. If the set of transactions in an attempt is equal to or
		greater than the Retry Wait value, then there will be no
		further delay before the next attempt is started.
		For more information, refer to Deploying Phones From the
		Boot Server on page 3-15.
Provisioning	Default or SAS-VP	If SAS-VP is selected, provisioning is done (in addition to
Method		the normal process).
Network	Cable/DSL,	The network environment the phone is operating in.
	LAN,	The default value is Cable/DSL.
	Dial-up
Tag SN to UA	Disabled, Enabled	If enabled, the phone’s serial number (MAC address) is
		included in the User-Agent header of the Microbrowser.
		The default value is Disabled.
Provisioning String	any string	The URL used in XML post/response transactions. If
		empty, the configured URL is used.
		This field is disabled when Provisioning Method is
		Default.

3 - 10