Polycom SIP 3.0.2 manual If fixedDayEnable is set to, Start.dayOfWeek, Start.date is ignored

			Configuration Files
	Permitted
Attribute	Values	Default	Interpretation
tcpIpApp.sntp.daylightSavings.start.date	1-31	8	If fixedDayEnable is set to
			1, use as day of the month
			to start DST.
			If fixedDayEnable is set to
			0, us the mapping: 1 = the
			first occurrence of a given
			day-of-the-week in a month,
			8 = the second occurrence
			of a given day-of-the-week
			in a month, 15 = the third
			occurrence of a given
			day-of-the-week in a month,
			22 = the fourth occurrence
			of a given day-of-the-week
			in a month
tcpIpApp.sntp.daylightSavings.start.time	0-23	2	Time of day to start DST in
			24 hour clock.
			Mapping: 2=2 am, 14=2 pm
tcpIpApp.sntp.daylightSavings.start.dayOfWeek	1-7	1	Day of week to apply DST.
			Mapping: 1=Sun, 2=Mon,
			..., 7=Sat
tcpIpApp.sntp.daylightSavings.start.dayOfWeek.la	0, 1	0	If set to 1 and
stInMonth			fixedDayEnable is set to 0,
			DST starts on the last day
			(specified by
			start.dayOfWeek) of the
			week in the month. The
			start.date is ignored.
tcpIpApp.sntp.daylightSavings.stop.month	1-12	11	Month to stop DST.
tcpIpApp.sntp.daylightSavings.stop.date	1-31	1	Day of the month to stop
			DST.
tcpIpApp.sntp.daylightSavings.stop.time	0-23	2	Time of day to stop DST in
			24 hour clock.
tcpIpApp.sntp.daylightSavings.stop.dayOfWeek	1-7	1	Day of week to stop DST.
tcpIpApp.sntp.daylightSavings.stop.dayOfWeek.la	0, 1	0	If set to 1 and
stInMonth			fixedDayEnable set to 0,
			DST stops on the last day
			(specified by
			stop.dayOfWeek) of the
			week in the month. The
			stop.date is ignored.

A - 55