Polycom SIP 3.0.2 Automatic Off-Hook Call Placement, Call Hold, Bg.gf.gray.3.name=polycom.bmp

Configuring Your System

dFor the bitmaps, enter a bitmap filename and put the file on the boot server. For example:

bg.gf.gray.3.name=”polycom.bmp”

The default size for bitmaps is 320 x 160. Smaller bitmaps will be centered and a white border added. Larger bitmaps will be centered and cropped to fit.

eSave the modified sip.cfg configuration file. Configuration changes can performed centrally at the boot server:

Central	Configuration file:	Specify which backgrounds will be displayed.
(boot server)	phone1.cfg	• For more information, refer to Backgrounds <bg/> on page A-70.

Automatic Off-Hook Call Placement

The phone supports an optional automatic off-hook call placement feature for each registration.

Configuration changes can performed centrally at the boot server:

Central	Configuration file:	Specify which registrations have the feature and what contact to call
(boot server)	phone1.cfg	when going off hook.
		• For more information, refer to Automatic Off-Hook Call Placement
		<autoOffHook/> on page A-94.

Call Hold

The purpose of hold is to pause activity on one call so that the user may use the phone for another task, such as to make or receive another call. Network signaling is employed to request that the remote party stop sending media and to inform them that they are being held. A configurable local hold reminder feature can be used to remind the user that they have placed calls on hold. The call hold reminder is always played through the speakerphone.

4 - 17