Polycom SIP 3.0.2 manual Earlier releases from the boot server, Phone1212.cfg, sip212.cfg

Administrator’s Guide SoundPoint IP / SoundStation IP

CONFIG_FILES="[PHONE_MAC_ADDRESS]-user.cfg, phone1.cfg, sip.cfg" CONFIG_FILES_SPIP500="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg" CONFIG_FILES_SPIP300="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg"

	MISC_FILES=""
	LOG_FILE_DIRECTORY=""
	OVERRIDES_DIRECTORY=""
	CONTACTS_DIRECTORY=""
	/>
	5. Remove any <Ethernet address>.cfg files that may have been used with
	earlier releases from the boot server.
Note
	This approach takes advantage of an enhancement that was added in
	SIP2.0.1/BootROM 3.2.1 that allows for the substitution of the phone specific
	[MACADDRESS] inside configuration files. This avoids the need to create unique
	<Ethernet address>.cfg files for each phone such that the default
	000000000000.cfg file can be used for all phones in a deployment.
	If this approach is not used, then changes will need to be made to all the <Ethernet
	address>.cfg files for SoundPoint IP 300 and 500 phones or all of the <Ethernet
	address>.cfg files if it is not explicitly known which phones are SoundPoint IP 300
	and 500 phones.
	For more information, refer to “Technical Bulletin 35311: Supporting
	SoundPoint IP 300 and IP 500 Phones with SIP 2.2 and Later Releases“ at
	http://www.polycom.com/support/voice/.

3 - 20