Polycom SIP 3.0.2 manual Central Report Collector collector

			Configuration Files
	Permitted
Attribute	Values	Default	Interpretation
voice.vad.signalAnnex	0, 1	Null	If set to 1 and voice.vadEnable is set to 1, Annex B is
B			used. A new line can be added to SDP depending on the
			setting of this parameter and the voice.vadEnable
			parameter.
			• If voice.vadEnable is set to 1, add attribute line
			a=fmtp:18 annexb="yes" below a=rtpmap… attribute
			line (where '18' could be replaced by another
			payload).
			• If voice.vadEnable is set to 0, add attribute line
			a=fmtp:18 annexb="no" below a=rtpmap… attribute
			line (where '18' could be replaced by another
			payload).
			If set to 0 or Null, there is no change to SDP.

Quality Monitoring <quality monitoring/>

This attribute includes:

•Central Report Collector <collector/>

•Alert Reports <alert/>

•Server <server/>

•RTCP-XR <rtcpxr/>

Central Report Collector <collector/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
voice.qualityMonitoring.collector.enable.pe	0, 1	0	Enables generation of periodic
riodic			quality reports throughout a call.
voice.qualityMonitoring.collector.enable.se	0, 1	0	Enables generation of a quality
ssion			report at the end of each call.

A - 47