Polycom SIP 3.0.2 manual Web Server httpd, Value that is out of range, Default value is used

Configuration Files

Keep-Alive <keepalive/>

Allowing for the configuration of TCP keep-alive on SIP TLS connections, the phone can detect a failures quickly (in minutes) and attempt to re-register with the SIP call server (or its redundant pair).

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
tcpIpApp.keepalive.tcp.idleTransmitInterval	10 to 7200	Null	After idle x seconds, the
			keep-alive message is sent to
			the call server.
			If set to Null, the default value is
			30 seconds.
			Note: If this parameter is set to a
			value that is out of range, the
			default value is used.
tcpIpApp.keepalive.tcp.noResponseTrasmitIn	5 to 120	Null	If no response is received to
terval			keep-alive message, another
			keep-alive message is sent to
			the call server after x seconds.
			If set to Null, the default value to
			20 seconds.
			Note: If this parameter is set to a
			value that is out of range, the
			default value is used.
tcpIpApp.keepalive.tcp.sip.tls.enable	0, 1	0	If set to 1, enable TCP keep-alive
			for SIP signalling connections
			that use TLS transport.
			If set to 0, disable TCP
			keep-alive for SIP signalling
			connections that use TLS
			transport.

Web Server <httpd/>

The phone contains a local web server for user and administrator features. This can be disabled for applications where it is not needed or where it poses a security threat. The web server supports both basic and digest authentication. The authentication user name and password are not configurable for this release.

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
httpd.enabled	0, 1	1	If set to 1, the HTTP server will be enabled.

A - 57