Polycom SIP 3.0.2 manual Server server Emergency emergency

Administrator’s Guide SoundPoint IP / SoundStation IP

•There is no limitation on the number of R triplet sets in a digit map. However, a digit map that contains less than full number of triplet sets (for example, a total of 2Rs or 5Rs) is considered an invalid digit map.

•Using T in the left part of RRR syntax is not recommended. For example, R0TR322R should be avoided.

This configuration attribute is defined as follows:

Attribute	Permitted Values	Default	Interpretation
dialplan.digitmap	string compatible with the	[2-9]110T	When this attribute is
	digit map feature of	+011xxx.T	present, number-only dialing
	MGCP described in 2.1.5		during the setup phase of
		0[2-9]xxxxxxxxx
	of RFC 3435. String is		new calls will be compared
		+1[2-9]xxxxxxxx
	limited to 768 bytes and		against the patterns therein
	30 segments; a comma is	[2-9]xxxxxxxxx	and if a match is found, the
	also allowed; when	[2-9]xxxT	call will be initiated
	reached in the digit map,		automatically eliminating the
	a comma will turn dial		need to press Send.
	tone back on;’+’ is allowed		Attributes
	as a valid digit; extension
			dialplan.applyToCallLis
	letter ‘R’ is used as
			tDial,
	defined above.
			dialplan.applyToDirecto
			ryDial,
			dialplan.applyToUserDia
			l, and
			dialplan.applyToUserSen
			d control the use of match
			and replace in the dialed
			number in the different
			scenarios.
dialplan.digitmap.timeOut	string of positive integers	3 3 3 3 3 3	Timeout in seconds for each
	separated by ‘’		segment of digit map.
			Note: If there are more digit
			maps than timeout values,
			the default value of 3 will be
			used. If there are more
			timeout values than digit
			maps, the extra timeout
			values are ignored.

Routing <routing/>

This attribute allows the user to create a specific routing path for outgoing SIP calls independent of other “default” configurations.

This attribute also includes:

•Server <server/>

•Emergency <emergency/>

A - 18