Polycom SIP 3.0.2 manual Special Events specialEvent, Conference Setup conference

			Configuration Files
	Permitted
Attribute	Values	Default	Interpretation
voIpProt.SIP.requestValidation.x.req	A valid string	Null	Determines which events specified with the
uest.y.event			Event header should be validated; only
			applicable when
			voIpProt.SIP.requestValidation.x.re
			quest is set to “SUBSCRIBE” or “NOTIFY”.
			If set to Null, all events will be validated.
voIpProt.SIP.requestValidation.dige	A valid string	Polycom	Determines string used for Realm.
st.realm		SPIP

Special Events <specialEvent/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
voIpProt.SIP.specialEvent.lineSeize.n	0, 1	1	If set to 1, process a 200 OK response for a
onStandard			line-seize event SUBSCRIBE as though a
			line-seize NOTIFY with Subscription State:
			active header had been received, this speeds
			up processing.
voIpProt.SIP.specialEvent.checkSync	0, 1	0	If set to 1, always reboot when a NOTIFY
.alwaysReboot			message is received from the server with
			event equal to check-sync.
			If set to 0, only reboot if any of the files listed
			in <MAC-address>.cfghave changed on the
			FTP server when a NOTIFY message is
			received from the server with event equal to
			check-sync.

Conference Setup <conference/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
voIpProt.SIP.conference.address	ASCII string	Null	If Null, conferences are set up on the phone
	up to 128		locally.
	characters		If set to some value, conferences are set up
	long
			by the server using the conferencing agent
			specified by this address. The acceptable
			values depend on the conferencing server
			implementation policy.

A - 15