Polycom SIP 3.0.2 manual Shared Calls shared Hold, Local Reminder hold/localReminder, Servers

Administrator’s Guide SoundPoint IP / SoundStation IP

	Permitted
Attribute	Values	Default	Interpretation
call.singleKeyPressConference	0,1	0	If set to 1, the conference will be setup after a
			user presses the Conference soft key or
			Conference key the first time. Also, all sound
			effects (dial tone, DTMF tone while dialing and
			ringing back) are heard by all existing
			participants in the conference.
			If set to 0 or Null, sound effects are only heard by
			conference initiator (old behavior).
			Only supported for SoundPoint IP 550, 560,650 .
			For all others, set to 0.
call.localConferenceCallHold	0, 1	0	If set to 0, a hold will happen for all legs when
			conference is put on hold. (old behavior).
			If set to 1, only the host is out of the conference,
			all other parties in conference continue to talk.
			(new behavior).
			If set to Null, the default value is 0.
			Only supported for SoundPoint IP 550, 560,650 .
			For all others, set to 0.
call.transfer.blindPreferred	0,1	Null	If set to 1, the Blind soft key appears as a
			transfer type.
			If set to 0 or Null, the Normal soft key appears.
			Note: This parameter is supported on the
			SoundPoint IP 330/320 only.

This attribute also includes:

•Shared Calls <shared/>

•Hold, Local Reminder <hold/><localReminder/>

Shared Calls <shared/>

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
call.shared.disableDivert	0, 1	1	If set to 1, disable diversion feature for shared
			lines.
			Note: This feature is disabled on most call
			servers.
call.shared.seizeFailReorder	0, 1	1	If set to 1, play re-order tone locally on shared
			line seize failure.

A - 60