Dell 1909W Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1909W/en/ug/setup.htm[11/8/2012 2:53:45 PM]
Back to Contents Page
Setting Up the Monitor

Dell™ 1909W Flat Panel Monitor User's Guide

Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When the OptiPlexTM USFF 780/ OptiPlex TM SFF 980 AIO stand is bought, please refer to the respective AIO stand setup
guide for set up instructions.
To attach the monitor stand:
1. Place the stand on a flat surface
2. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
3. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.

Connecting Your Monitor