Operating Your Camera
MAIN | SETUP |
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
6.SSNR3 | ON |
2.Select a desired mode using the Function Setup.
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlights, the light can mask out much of the
-LEVEL : Adjust level of the HLC function.
-LIMIT : Enable to change the operating condition.
-MASK COLOR/TONE : Change the color / transparency of the masking area.
(Black, Red, Blue, Cyan, Magenta)
-TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced 
OFF : Not being used
3.Select a desired mode using the Function Setup switch and press the Function Setup switch.
Select ‘BLC’ to adjust the area to be |
| HLC : Enable the user to change the level, |
| ||
| ||
enhanced then adjust the level. |
| limit, mask color/tone and area. |
LOW
120
5
172
Notes
•Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.
•When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode.
•The HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY mode.
•BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
SSNR3
This function reduces the background noise in a low luminance environment.
1.When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup switch so that the arrow indicates ‘SSNR3’.
MAIN SETUP
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
6.SSNR3 | ON |
7.DAY/NIGHT | AUTO |
2.Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3.Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust the noise reduction level.
Notes
•You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’.
•When adjusting the noise reduction level in the SSNR mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image.
COLOR DOME CAMERA 22 User Guide | COLOR DOME CAMERA 23 User Guide |
