Moxa Technologies UC-7420/7410 Configuring the Wlan via the Pcmcia Interface, IEEE802.11b

UC-7420/7410 User’s Manual Getting Started

NOTE After changing the IP settings, use the networking restart command to activate the new IP address. However, the LCM display will still show the old IP address. To update the LCM display, you will need to reboot the UC-7420/7410.

Modifying Network Settings over the Network

IP settings can be activated over the network, but the new settings will not be saved to the flash ROM without modifying the file /etc/network/interfaces.

For example, type the command #ifconfig ixp0 192.168.1.1 to change the IP address of LAN1 to 192.168.1.1.

Configuring the WLAN via the PCMCIA Interface

IEEE802.11b

The following IEEE802.11b wireless modules are supported:

yNDC NWH1010

ySenao NL-2511CD PLUS(F200)

ySenao NL-2511CD PLUS EXT2 MERCURY (ETSI)

ySenao NI3-2511CD-PLUS3

yDARK DKW11-330HP

yDARK XI-330H

yPlanex (PCI) GW-NS11H

yCorega CG-WLPCCL-11

To configure the WLAN for IEEE802.11b:

1.Unplug the PCMCIA Wireless LAN card first.

2.Configure the Wireless LAN card’s default IP setting profile.

(Default IP address is 192.168.5.127, netmask 255.255.255.0)

Edit network.opts with the following command to edit Wireless LAN’s default setting.

#vi /etc/pcmcia/network.opts

2-7