Open VPN | Moxa Technologies UC-7420/7410 guide

UC-7420/7410 User’s Manual

Managing Communication

20:system.9.1.3.4 (octet string) The MIB module for managing IP and ICMP implementations

21:system.9.1.3.5 (octet string) The MIB module for managing UDP implementations

22:system.9.1.3.6 (octet string) View-based Access Control Model for SNMP.

23:system.9.1.3.7 (octet string) The SNMP Management Architecture MIB.

24:system.9.1.3.8 (octet string) The MIB for Message Processing and Dispatching.

25:system.9.1.3.9 (octet string) The management information definitions for the SNMP User-based Security Model.

26:system.9.1.4.1 (timeticks) 0 days 00h:00m:00s.04th (4)

27:system.9.1.4.2 (timeticks) 0 days 00h:00m:00s.09th (9)

28:system.9.1.4.3 (timeticks) 0 days 00h:00m:00s.09th (9)

29:system.9.1.4.4 (timeticks) 0 days 00h:00m:00s.09th (9)

30:system.9.1.4.5 (timeticks) 0 days 00h:00m:00s.09th (9)

31:system.9.1.4.6 (timeticks) 0 days 00h:00m:00s.19th (19)

32:system.9.1.4.7 (timeticks) 0 days 00h:00m:00s.22th (22)

33:system.9.1.4.8 (timeticks) 0 days 00h:00m:00s.22th (22)

34:system.9.1.4.9 (timeticks) 0 days 00h:00m:00s.22th (22)

***** SNMP QUERY FINISHED *****

NOTE Click on the following links for more information about MIB II and RS-232 like group: http://www.faqs.org/rfcs/rfc1213.html http://www.faqs.org/rfcs/rfc1317.html

ÆUC-7420/7410 does NOT support SNMP trap.

The following tables list the variables supported by UC-7420/7410.

Open VPN

This function is only available for firmware version V1.5 (and later versions).

OpenVPN provides two types of tunnels for users to implement VPNS: Routed IP Tunnels and Bridged Ethernet Tunnels. Here we describe the second type of tunnel. To begin with, check to make sure that the system has a virtual device /dev/net/tun. If not, issue the following command:

# mknod /dev/net/tun c 10 200

An Ethernet bridge is used to connect different Ethernet networks together. The Ethernets are bundled into one bigger, “logical” Ethernet. Each Ethernet corresponds to one physical interface (or port) that is connected to the bridge.

On each OpenVPN machine, you should generate a working directory, such as /etc/openvpn, where script files and key files reside. Once established, all operations will be performed in that directory.

4-17

Image 69

Moxa Technologies UC-7420/7410 user manual Open VPN

Contents

Third Edition, June UC-7420/7410 User’s Manual Copyright Notice TrademarksDisclaimer Table of Contents Chapter UC Finder Appendix B Windows Tool Chain Introduction ‰ Hardware Introduction Introduction Product Features Package ChecklistOverview UC-7410-LX Product Hardware Specifications Appearance and Dimensions Hardware IntroductionAppearance Dimensions Hardware Block Diagram LED IndicatorsLED Name Color Meaning Reset Button Reset-type ButtonsReset to default Button Real Time Clock Wall or Cabinet Placement Options Wiring Requirements Hardware Connection DescriptionDIN-Rail Mounting Connecting to the Network Connecting the PowerPin Signal Grounding UC-7420/7410 Connecting to the Console Port Connecting to a Serial DeviceCompactFlash Pin RS-232 RS-422 RS-485 Software Architecture Software Introduction Software Package Journaling Flash File System JFFS2 Software Version Comparison Table Directory Change Protocol stacks and utilities Getting Started ‰ Configuring the Ethernet Interface Powering on UC-7420/7410 Connecting UC-7420/7410 to a PCSerial Console Telnet Console Default IP Address Netmask192.168.3.127 255.255.255.0 192.168.4.127 255.255.255.0 Windows Users SSH Console Modifying Network Settings with the Serial Console Configuring the Ethernet InterfaceLinux Users Static IP addresses Dynamic IP addresses Modifying Network Settings over the Network Configuring the Wlan via the Pcmcia InterfaceDefault IP address is 192.168.5.127, netmask IEEE802.11b #vi /etc/wlan/wlancfg-any IEEE802.11g Setting Setting Explanation Key1Str, Key2Str, Key3Str, Key4Str-Sets strings Key1 to Key4 TurboRate-Enables or disables TurboRate Test Program-Developing Hello.c Installing the Tool Chain LinuxChecking the Flash Memory Space Step You should receive the following response Compiling Hello.c Testing Environment Developing Your First ApplicationUploading Hello to UC-7420/7410 and Running the Program #mount -t iso9660 /dev/cdrom /mnt/cdrom Compiling tcps2.c PuTTY Uploading tcps2-release and Running the Program #jobs // use this command to check if the program is running UC-7420/7410 User’s Manual Testing Procedure Summary UC-7420/7410 User’s Manual Managing Embedded Linux ‰ System Version Information ‰ System Image Backup System Version Information System Image BackupUpgrading the Firmware Upgrading the firmware will erase all data on the Flash ROM #upramdisk #cd /mnt/ramdisk Loading Factory Defaults Backing Up the User File System Firmware versions earlier than V1.5 not includingFirmware version V1.5 and later versions Enabling and Disabling Daemons UC-7420/7410 User’s Manual Managing Embedded Linux Setting the Run-Level Setting the Time Manually Adjusting the System Time Example shell script to update the system time periodically NTP ClientUpdating the Time Automatically Change mode of fixtime.sh Cron-daemon to Execute Scheduled CommandsEnable the cron daemon manually Enable cron when the system boots up Connecting Peripherals USB Mass StorageCF Mass Storage ‰ Iptables ‰ NAT Managing Communications Telnet / FTP Web Service-ApacheEnabling the Telnet/ftp server Disabling the Telnet/ftp server Usr/www/cgi-bin Saving a Web Page to the CF Card Use the following commands to restart the Apache web server Iptables Local Host Packets Define policy for chain rules Observe and erase chain rulesUsage Examples Iptmac Append or delete rules NAT Example Enabling NAT at Bootup Dial-up Service-PPP Example 2 Connecting to a PPP server over a hard-wired link UP Loopback Running How to check the connection Setting up a Machine for Incoming PPP Connections Setting up UC-7420/7410 as an NFS ServerNFS Network File System #vi /etc/exports Setting up UC-7420/7410 as an NFS Client Steps 2 Mail Open VPN Internet IFS=‘ Create link symbols to enable this script at boot time Destination Gateway Genmsk Flags Metric Use Iface Now ping Host B from Host a by typing Setup 3 Routed IP Destination Gateway Genmsk Flags Metric Use Iface Programmer’s Guide Address Size Contents Flash Memory MapLinux Tool Chain Introduction Obtaining help Debugging with GDBCross Compiling Applications and Libraries Tools Available in the Host Environment Device API RTC Real Time ClockBuzzer WDT Watch Dog Timer Input Int fd File handle from swtdopen return value Output User application example Example Special Note Swtddisableswtdfd Int mainint argc, char *argv Pidt sonpid Example to get the baud rate Example to set the baud rate Baud rate inaccuracy KeyPadSpecial Note Examples Make File Example UC Finder Windows UC Finder Installing the Software UC-7420/7410 User’s Manual UC Finder Broadcast Search Linux ucfinder Busybox V0.60.4 Linux normal command utility collection System CommandsFile manager Editor Process OtherMoxa special utilities Windows Tool Chain Introduction Introduction Select the Root Directory Installation Procedure UC-7420/7410 User’s Manual Windows Tool Chain Introduction UC-7420/7410 User’s Manual Windows Tool Chain Introduction Using the Bash Shell UC-7420/7410 User’s Manual Windows Tool Chain Introduction GDB debug tool-Insight UC-7420/7410 User’s Manual Windows Tool Chain Introduction Service Information Following services are provided Moxa Internet Services Moxa Product † UC-7410-LX † UC-7420-LX Serial Number Problem Report Form Product Return Procedure