|
|
| Wireless Cable Modem Gateway CGD24G User Manual |
|
|
|
|
| |
Table |
| |||
| Downstream |
| • On: The gateway has completed its downstream scan, and is performing upstream |
|
|
|
| ||
| Link |
| operations, is completing configuration of the cable interface, or is fully functional with its |
|
|
|
| cable interface. |
|
|
|
| • Blink: The gateway has just powered up or it is performing a downstream scan. |
|
|
|
| • Off: The gateway’s |
|
|
|
| downstream scan. |
|
| Wireless |
| • On: The wireless access point is operating normally. |
|
|
|
| • Blink: Data is being transmitted or received on the wireless interface. |
|
|
|
| • Blink in a fast pattern: The gateway attempts to establish a connection to a wireless |
|
|
|
| client through |
|
|
|
| • Off: The wireless access point is disabled. |
|
| LAN |
| • On (green): The port has detected link with a 100 Mbps device. |
|
| (Local Area |
| • Blink (green): Data is being transmitted or received at 100 Mbps. |
|
| Network) |
| • On (yellow): The Local port has detected link with a 10 Mbps device. |
|
|
|
| • Blink (yellow): Data is being transmitted or received at 10 Mbps. |
|
|
|
| • Off: No link is detected on this port. |
|
|
|
|
|
|
Router Rear Panel
The rear panel of the CGD24G gateway contains the connections identified below:
wireless antenna
USB port
reset button
coaxial cable to your cable service provider
4 Ethernet LAN ports
AC power adapter input
Figure
Connecting the Gateway to the Internet |
