Backing Up and Restoring Your Settings

Wireless Cable Modem Gateway CGD24G User Manual

3.To change the password, first enter the old password, and then enter the new password twice.

4.Click Apply to save your changes.

Note: After changing the password, you will be required to log in again to continue the configuration. If you have backed up the gateway settings previously, you should do a new backup so that the saved settings file includes the new password.

Resetting to Factory Default Settings

You can erase the gateway configuration and reset it to the factory default settings. For information about the factory default settings, see “Factory Default Settings” in Appendix A. To reset the gateway to its factory settings:

1.In the Set Password screen (see Figure 4-3), to the right of Restore Factory Defaults, select the Yes radio button.

2.Click Apply to save your changes.

The gateway reboots automatically. After rebooting, the gateway’s password will be password, the LAN IP address will be 192.168.0.1, and the gateway’s DHCP client will be enabled..

Note: If you do not know the login password or IP address, you can use the reset button on the rear panel of the gateway to restore the factory default settings.

Note: When erasing and resetting the configuration, do not interrupt the process by going on online, turning off the gateway, or shutting down the computer.