ENGLISH
Storing DAB services in memory
You can preset six DAB services (primary) for each band.
1Select a service you want (see steps ~to ⁄ on page 15).
2Select the preset number (1 – 6) you want to store into.
•While receiving an FM RDS station:
When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service.
When shipped from the factory, Alternative Frequency Reception is activated.
To deactivate the Alternative Frequency Reception, see page 14.
P4 | BAYERN 2 |
Preset number flashes for a while.
Tuning in to a preset DAB service
1 
2Select the preset DAB service (primary) number (1 – 6) you want.
If the selected primary service has some secondary services, pressing the same button again will tune in to the secondary services.
Tracing the same programme— Alternative Frequency Reception
You can keep listening to the same programme by activating the Alternative Frequency Reception.
•While receiving a DAB service:
When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.
To change the display information while tuning to an ensemble
Service name =Ensemble name
=Channel number =Frequency
=Clock =(back to the beginning)
iPod / D. player operations
This unit is ready for operating an Apple iPod or a JVC D. player from the control panel.
Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
•Interface adapter for
•D. player interface
•For connection, see Installation/Connection Manual (separate volume).
•For details, refer also to the manual supplied with the interface adapter.
Caution:
Make sure to turn off this unit or turn off the vehicle’s ignition switch before connecting or disconnecting the iPod or D. player.
16
