Indications | Item | Selectable settings, [reference page] | |||
|
| ( : Initial) |
| ||
|
|
|
|
|
|
IF BAND | • AUTO | : Increases the tuner selectivity to reduce interference noises | |||
Intermediate frequency |
|
|
| between close stations. (Stereo effect may be lost.) | |
band | • WIDE | : Subject to the interference noises from adjacent stations, but sound | |||
|
|
|
|
| quality will not be degraded and the stereo effect will remain. |
*1 | If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “OFF” to | ||||
| save the car’s battery. |
|
|
|
|
*2 | Only for FM RDS stations. |
| |||
*3 | Depends on the amplifier gain control. |
| |||
*4 | Displayed only when DAB tuner is connected. | ||||
*5 | Some characters or symbols will not be shown correctly (or will be blanked) on the display. | ||||
*6 | Displayed only when one of the following sources is |
ENGLISH
DAB tuner operations
What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “ensemble.” In addition, each
By connecting the DAB tuner, this unit can do the following:
•Tracing the same programme automatically
page 14).
It is recommended to use DAB tuner
•Refer also to the Instructions supplied for your DAB tuner.
~
Ÿ
!Start searching for an ensemble.
When an ensemble is received, searching stops.
To stop searching, press thesame button again.
⁄Select a service (either primary or secondary) to listen to.
To tune in to an ensemble manually
Start searching for an ensemble, as in step !above...
1
2Select a desired ensemble frequency.
15